NB-IOT

2GG PCON NB-IOT 

Battery powered communicator/gateway for smart metering 

The 2GG PCON series devices offer you a flexible and efficient NB-IoT communication solution. The PCON is available in point-to-point (Mbus, Modbus, Impulse) or concentrator (Wmbus) variants.

The PCON devices are simple to integrate, configure and maintain. All PCON are equipped with NB-IoT communication, but different communication modules can also be used if the project requires flexibility.

Battery autonomy is dependent on device settings and can last up to 12 years on one battery. Device enclosure for outdoor use guarantees a long life time. With the use of the 2GG Server solutions, the device is simple to use and install in the field (activation and gathering). All parameters are set or changed remotely and can be present for all devices. Using the PCON devices can be as simple as placing it on a location and activating it. 

BENEFITS 

  • Communication on NB-IoT network.

  • Battery life up to 10 years.

  • Simple and easy deployment.

  • Configurable interval for data upload to the server.

  • Configurable meter data sampling.

  • All settings can be changed from the cloud.

  • 2GG on 868 MHz for local settings.

  • Walk-by data collection possible.

  • Suitable for outdoor usage (IP68).

  • Support for external antennas.

  • 3 months of local metering data storage (depending on settings). 

MAIN PARAMETERS 

Battery type : 3,6 V Lithium-thionyl chloride 

Battery capacity : 19 Ah (up to 38Ah) -user replaceable 

Battery lifespan : Up to 12 years (configuration dependent) 

Temperature range : -30 °C to 60 °C 

NB-IoT : Uplink up to 66kbps, Downlink up to 34kbps 

Frequency bands : RF ISM 868 MHz, NB-IoT Band 20, Band 8 

External antenna : SMA connector for external antenna 

RF transmission power : Max. 14 dBm / 25mW 

RF sensitivity : -120 dBm 

Enclosure colour: White, blue 

Cable (where applicable) : Multi wire 0,5 mm2 with wire end ferrules 

Cable length (where applicable) : 50 cm 

2GG ME NB E450 

Wired communicator for Landis+gyr E450 electricity meters

2GG ME NB E450 is a 2GG dedicated device for connecting Landis+Gyr E450 electricity meters. This communicator uses NB-IoT mobile network for connecting to the server. It's powered from the meter M-Bus line and it can send data up to one packet per second.

Main benefit for using this device besides high frequency of packet transfers is also its simple use. Connecting two wires to the meter and communicator automatically connects to the 2GG system. For quick check if connection is working, 2GG URFC can be used for directly connection to the 2GG ME NB E450.

 

BENEFITS 

  • Communication on NB-IoT network.

  • Simple and easy deployment.

  • Configurable interval for data upload to the server.

  • All settings can be changed from the cloud.

  • 2GG on 868 MHz for local settings.

  • Walk-by data collection possible.

  • Suitable for outdoor usage (IP68).

  • Support for external antennas. 

MAIN PARAMETERS 

Power supply : Powered from meter M-Bus 

Voltage range : 14 V to 48 V 

Temperature range : -30 °C to 60 °C 

RF transmission power : Max. 14 dBm / 25mW 

Enclosure protection : IP68 

Frequency bands : RF ISM 868 MHz, NB-IoT Band 20* 

Packet encryption : AES 128** 

*communication provider has to support NB IoT  network

**for 2GG protocol 

2GG PCON KON

Battery powered communicator/gateway for smart metering 

The 2GG PCON series devices offer you a flexible and efficient NB-IoT communication solution. The PCON is available in point-to-point (Mbus, Modbus, Impulse) or concentrator (Wmbus) variants.

The PCON devices are simple to integrate, configure and maintain. All PCON are equipped with NB-IoT communication, but different communication modules can also be used if the project requires flexibility.

Battery autonomy is dependent on device settings and can last up to 12 years on one battery. Device enclosure for outdoor use guarantees a long life time. With the use of the 2GG Server solutions, the device is simple to use and install in the field (activation and gathering). All parameters are set or changed remotely and can be present for all devices. Using the PCON devices can be as simple as placing it on a location and activating it. 

BENEFITS 

  • Communication on NB-IoT network.

  • Battery life up to 10 years.

  • Simple and easy deployment.

  • Configurable interval for data upload to the server.

  • Configurable meter data sampling.

  • All settings can be changed from the cloud.

  • 2GG on 868 MHz for local settings.

  • Walk-by data collection possible.

  • Suitable for outdoor usage (IP68).

  • Support for external antennas.

  • 3 months of local metering data storage (depending on settings). 

MAIN PARAMETERS 

Battery type : 3,6 V Lithium-thionyl chloride 

Battery capacity : 19 Ah (up to 38Ah) -user replaceable 

Battery lifespan : Up to 12 years (configuration dependent) 

Temperature range : -30 °C to 60 °C 

NB-IoT : Uplink up to 66kbps, Downlink up to 34kbps 

Frequency bands : RF ISM 868 MHz, NB-IoT Band 20, Band 8 

External antenna : SMA connector for external antenna 

RF transmission power : Max. 14 dBm / 25mW 

RF sensitivity : -120 dBm 

Enclosure colour: White, blue 

Cable (where applicable) : Multi wire 0,5 mm2 with wire end ferrules 

Cable length (where applicable) : 50 cm 

 

NB-IOT Solutions

2GG NB E450.png
PCON KON.png

2GG PCON NB-IOT 

Battery powered point-to-point communicator for smart metering 

The 2GG PCON series devices offer you a flexible and efficient NB-IoT communication solution. The PCON is available in point-to-point variants for different applications-MBus, Modbus (RS232 or RS485) and Impulse.

The PCON devices are simple to integrate, configure and maintain. All PCON are equipped with NB-IoT communication, but different communication modules can also be used if the project requires flexibility.

Battery autonomy is dependent on device settings and can last up to 12 years on one battery. Device enclosure for outdoor use guarantees a long life time. With the use of the 2GG Server solutions, the device is simple to use and install in the field (activation and gathering). All parameters are set or changed remotely and can be present for all devices. Using the PCON devices can be as simple as placing it on a location and activating it. 

BENEFITS 

  • Communication on NB-IoT network.

  • Battery life up to 10 years.

  • Simple and easy deployment.

  • Configurable interval for data upload to the server.

  • Configurable meter data sampling.

  • All settings can be changed from the cloud.

  • 2GG on 868 MHz for local settings.

  • Walk-by data collection possible via the buit-in RF 868MHz module.

  • Suitable for outdoor usage (IP68).

  • Support for external antennas.

  • 3 months of local metering data storage (depending on settings). 

MAIN PARAMETERS 

Battery type : 3,6 V Lithium-thionyl chloride 

Battery capacity : 19 Ah (up to 38Ah) -user replaceable 

Battery lifespan : Up to 12 years (configuration dependent) 

Temperature range : -30 °C to 60 °C 

NB-IoT : Uplink up to 66kbps, Downlink up to 34kbps 

Frequency bands : RF ISM 868 MHz, NB-IoT Band 20, Band 8 

External antenna : SMA connector for external antenna 

RF transmission power : Max. 14 dBm / 25mW 

RF sensitivity : -120 dBm 

Enclosure colour: White, blue 

Cable (where applicable) : Multi wire 0,5 mm2 with wire end ferrules 

Cable length (where applicable) : 50 cm 

2GG ME NB E450 

Wired communicator for Landis+gyr E450 electricity meters

2GG ME NB E450 is a 2GG dedicated device for connecting Landis+Gyr electricity meters. This communicator uses NB-IoT mobile network for connecting to the server. It's powered from the meter M-Bus line and it can send data up to one packet per second.

Main benefit for using this device besides high frequency of packet transfers is also its simple use. Connecting two wires to the meter and communicator automatically connects to the 2GG system. For quick check if connection is working, 2GG URFC can be used for directly connection to the 2GG ME NB E450.

 

BENEFITS 

  • Communication on NB-IoT network.

  • Simple and easy deployment.

  • Configurable interval for data upload to the server.

  • All settings can be changed from the cloud.

  • 2GG on 868 MHz for local settings.

  • Walk-by data collection possible.

  • Suitable for outdoor usage (IP68).

  • Support for external antennas. 

MAIN PARAMETERS 

Power supply : Powered from meter M-Bus 

Voltage range : 14 V to 48 V 

Temperature range : -30 °C to 60 °C 

RF transmission power : Max. 14 dBm / 25mW 

Enclosure protection : IP68 

Frequency bands : RF ISM 868 MHz, NB-IoT Band 20* 

Packet encryption : AES 128** 

*communication provider has to support NB IoT  network

**for 2GG protocol 

2GG PCON KON

Battery powered gateway for smart metering 

The 2GG PCON series devices offer you a flexible and efficient NB-IoT communication solution. The PCON KON is a WMBus concentrator designed to connect up to 64 devices via 868 MHZ RF WMBus. With the PCON KON we offer an efficient solution for locations, where multiple WMBus meters are present. 

The PCON devices are simple to integrate, configure and maintain. All PCON are equipped with NB-IoT communication, but different communication modules can also be used if the project requires flexibility in terms of connectivity (f.e Wifi or GPRS).

Battery autonomy is dependent on device settings and can last up to 12 years with the extended battery pack. Device enclosure for outdoor use guarantees a long life time. With the use of the 2GG Server solutions, the device is simple to use and install in the field (activation and gathering). All parameters are set or changed remotely and can be pre-set for all devices. Using the PCON devices can be as simple as placing it on a location and activating it. The concentrator uses a whitelist approach to ensure stable and efficient gathering of WMBus packets and has a 3 level data storage system integrated which ensures that the collected data is stored until received by the server. 

BENEFITS 

  • Communication on NB-IoT network.

  • Battery life up to 10 years.

  • Simple and easy deployment.

  • Configurable interval for data upload to the server.

  • Configurable meter data sampling.

  • All settings can be changed from the cloud.

  • WMBUS OMS and 2GG on 868-870 MHz

  • RF 868 MHZ for local settings.

  • Walk-by data collection possible.

  • Suitable for outdoor usage (IP68).

  • Support for external antennas.

  • 3 months of local metering data storage (depending on settings). 

MAIN PARAMETERS 

Battery type : 3,6 V Lithium-thionyl chloride 

Battery capacity : 19 Ah (up to 38Ah) -user replaceable 

Battery lifespan : Up to 12 years (configuration dependent) 

Temperature range : -30 °C to 60 °C 

NB-IoT : Uplink up to 66kbps, Downlink up to 34kbps 

Frequency bands : RF ISM 868 MHz, NB-IoT Band 20, Band 8 

External antenna : 2 SMA connectors for external antennas (NB-IoT and RF) 

RF transmission power : Max. 14 dBm / 25mW 

RF sensitivity : -120 dBm 

Enclosure colour: White, blue