
Gateways and Concentrators


2GG-KON02
multi-use, multi-technology concentrator built for industrial, facility and energy distribution uses
KON02 is designed for use cases, where real time data is needed and the amount of transferred data is larger. The device is powered by an external DC power supply of 48V DC. Connection to the 2GG system offers full automation and remote setting of metering device parameters as well as management of connected devices. The 2GG KON02 series of devices supports a variety of wireless and wired communication protocols and enables high-customization based on use case.
BENEFITS OF KON2
-
Support for different meters and communication protocols.
-
Possible internet connections (GPRS or WiFi).
-
Configurable TX power (up to 27 dBm).
-
4 non-isolated digital ports (3,3V).
-
2 isolated digital input ports—alarms (3,3V).
-
wM-BUS and 2GG on 868 MHz.
-
Up to 256 wired MBUS.
-
Supports up to 256 MODBUS (RS-485) devices.
-
Terminal port for serial connection from PC.
-
Configurable interval for data upload to the server.
-
Configurable device whitelist.
-
All settings can be changed from the cloud.
MAIN PARAMETERS
Supply voltage : 48 V DC
Average current : 40 mA
Maximum current : 550 mA
Temperature range : -20 °C to 60 °C
RF transmission power : Max. 27 dBm (500mW)
RF sensitivity : -120 dBm
Enclosure protection : IP54
Frequency bands : RF ISM 868 MHz, GSM/GPRS, WIFI (2.4GHz)
Wired ports : RS-485, M-BUS
Other ports : Possible extension, terminal port, digi-tal IO
Packet encryption : AES 128
Attachment : DIN rail
Connectors : Screw dimensions: M3; Pitch: 5,08 mm; Wire section 0,05-1,5 mm2
Enclosure : Material: PC (UL94 V-0); Dimensions (WxHxD): 88x90x58 mm; Standards ROHS, REACH compliant, DIN EN60715 TH35
2GG-KON04
WMBUS data concentrator
2GG KON04 is designed for wireless collection of data from utility meters like water, heat, cold and gas meters via W-Mbus. The solution has been developed in cooperation with energy distributors, utility companies, building management and is designed primarily for users with a large number of metering points. Mounting and setup of the device is as simple as possible. All configurations are handled through the cloud, which makes it ideal for use on large networks.
BENEFITS OF KON04
-
Different data upload options (GPRS or combined LTE-M/ NB-IOT/GPRS).
-
wM-BUS (T1 and C1 support simultaneously) and 2GG on 868-870 MHz.
-
Powered via mains supply DC 48V.
-
Simple and easy deployment.
-
Configurable TX power (up to 27 dBm).
-
Configurable interval for data upload to the server.
-
Configurable device whitelist.
-
All settings can be changed from the cloud.
MAIN PARAMETERS
Temperature range: -30 °C to 60 °C
RF transmission power: Max. 27 dBm (500mW)
RF sensitivity: -120 dBm
NB-IoT: Uplink up to 66kbps, Downlink up to 34kbps
LTE CAT-M1(eMTC): Uplink up to 375kbps, Downlink up to 300kbps
GPRS: Uplink up to 85.6Kbps, Downlink up to 85.6Kbps
LTE: FDD-LTE B3/B8/B20/B28
GPRS: 900/1800Mhz
Enclosure material: ASA
Enclosure dimensions: 110x150x40 mm (WxDxH)
Enclosure colour: white grey
Frequency bands: RF ISM 868 MHz, GSM/GPRS, WIFI (2.4GHz)
Packet encryption: AES 128
Attachment (Mounting): Screws or zip ties
Enclosure protection: IP67
2GG PCON KON
Battery powered gateway for smart metering
The 2GG PCON series devices offer you a flexible and efficient NB-IoT communication solution. The PCON KON is a WMBus concentrator designed to connect up to 64 devices via 868 MHZ RF WMBus. With the PCON KON we offer an efficient solution for locations, where multiple WMBus meters are present.
The PCON devices are simple to integrate, configure and maintain. All PCON are equipped with NB-IoT communication, but different communication modules can also be used if the project requires flexibility in terms of connectivity (f.e Wifi or GPRS).
Battery autonomy is dependent on device settings and can last up to 12 years with the extended battery pack. Device enclosure for outdoor use guarantees a long life time. With the use of the 2GG Server solutions, the device is simple to use and install in the field (activation and gathering). All parameters are set or changed remotely and can be pre-set for all devices. Using the PCON devices can be as simple as placing it on a location and activating it. The concentrator uses a whitelist approach to ensure stable and efficient gathering of WMBus packets and has a 3 level data storage system integrated which ensures that the collected data is stored until received by the server.
BENEFITS
-
Communication on NB-IoT network.
-
Battery life up to 10 years.
-
Simple and easy deployment.
-
Configurable interval for data upload to the server.
-
Configurable meter data sampling.
-
All settings can be changed from the cloud.
-
WMBUS OMS and 2GG on 868-870 MHz
-
RF 868 MHZ for local settings.
-
Walk-by data collection possible.
-
Suitable for outdoor usage (IP68).
-
Support for external antennas.
-
3 months of local metering data storage (depending on settings).
MAIN PARAMETERS
Battery type : 3,6 V Lithium-thionyl chloride
Battery capacity : 19 Ah (up to 38Ah) -user replaceable
Battery lifespan : Up to 12 years (configuration dependent)
Temperature range : -30 °C to 60 °C
NB-IoT : Uplink up to 66kbps, Downlink up to 34kbps
Frequency bands : RF ISM 868 MHz, NB-IoT Band 20, Band 8
External antenna : 2 SMA connectors for external antennas (NB-IoT and RF)
RF transmission power : Max. 14 dBm / 25mW
RF sensitivity : -120 dBm
Enclosure colour: White, blue
